FROM OUR STOCKPORT WORKSHOP

PS5 HDMI Trace Repair: Rebuilding Pin 7 in Stockport

← All repair stories

Replacement PS5 HDMI port with a fine copper wire rebuilding the damaged pin 7 trace.

This PS5 HDMI trace repair at our Stockport workshop involved more than fitting a replacement socket. The original HDMI port had suffered severe damage, and the connection to pin 7 needed rebuilding. After soldering on the new port, we used fine copper wire to repair the damaged data line and restore the picture.

The problem: damage beyond the HDMI socket

A replacement port was part of the repair, but the damage extended to the board connection. In this case, the trace serving HDMI pin 7 could no longer provide the connection it needed.

A trace is a tiny conductive path on the circuit board. Replacing the metal socket alone does not replace a damaged path beneath it. That is what made this job different from our earlier PS5 HDMI port replacement case study.

PS5 motherboard HDMI connection area with the old port removed, before the trace repair.
The HDMI connection area with the old port removed, showing the board before the repair was completed.

PS5 HDMI trace repair: rebuilding the pin 7 connection

We soldered the replacement HDMI port onto the motherboard, then rebuilt the damaged pin 7 connection using fine copper wire. The wire restored the electrical path that the damaged trace had previously provided.

This was a targeted repair to the existing motherboard. The close-up below shows the replacement socket and the small wire used for the trace reconstruction. It is the detail that a simple outside view of a new HDMI port would miss.

Replacement PS5 HDMI port with a fine copper wire rebuilding the damaged pin 7 trace.
Replacement HDMI port fitted, with the pin 7 data connection rebuilt using fine copper wire.

The result: the picture returned

With the replacement port and trace repair completed, the PS5 produced a picture again. Our final workshop photo shows the console connected to a display with the PlayStation controller prompt on screen.

PS5 connected to a monitor displaying the controller prompt after HDMI port and trace repair.
The PS5 displaying a picture again after the HDMI port replacement and trace repair.

Why inspecting the board matters

This job shows why two damaged HDMI ports do not always involve identical work. One console may need the socket replaced; another may also need a damaged board connection reconstructed.

It does not mean every PS5 with no picture has this fault, or that every damaged trace can be repaired. The condition of the port and surrounding board needs checking before deciding what work is appropriate.

Need help with a damaged PS5 HDMI port?

Visit our PS5 HDMI repair page for service information, or explore our games console repairs in Stockport. We offer free diagnosis and a quote before repair work, with a six-month warranty on repairs.

Bring your console to AC Computer Warehouse, Unit 13 Kingston Mill, Chestergate, Stockport SK3 0AL. There is free parking outside, and UK-wide mail-in repairs are available. Send a repair enquiry or call 0161 282 2548.

Frequently asked questions

Can a PS5 HDMI port be repaired if a trace is damaged?

Sometimes. On this console, we rebuilt the pin 7 connection using fine copper wire after fitting the new port. Whether that is suitable depends on the damage and the condition of the remaining board connections.

Why was a new HDMI port not enough for this PS5?

The damage affected the data connection to pin 7 as well as the socket. We needed to rebuild that connection as part of the repair.

Does no picture always mean a damaged HDMI trace?

No. This case study describes the fault found on this particular PS5. Your console needs its own diagnosis before we can confirm the cause and quote for the repair.